Skip to main content
Version: 1.6.16

Alpha Labs

How to install and licence De-Feedback on your transform.engine!

De-Feedback FAQ​

Which buffer sizes can I use with De-Feedback?

De-Feedback on transform.engine currently supports the following buffer sizes:

Sample rateBuffer size
48 kHz64 or greater
96 kHz128 or greater

How do I register my transform.engine to receive the discount code for Alpha Labs De-Feedback?

You can register here: transform.engine registration

When will I receive my discount code?

The code will be emailed to you within 24 hours of registration.

Where do I enter the code?

Purchase the plugin on the Alpha Labs Audio website and apply the coupon code during the checkout process.

Will the discounted version of De-Feedback work only on the Fourier Audio transform.engine?

This discount code is for a full license of De-Feedback that is not restricted in any way and can run on any platform.

Installation​

Plugin Download Link: Alpha Labs Audio

info

You must run De-Feedback v1.1.4 or above on transform.engine. An older build will have incorrect DSP performance.

Licensing Method: Proprietary, run 'Test Run Plugin' to generate file (Licensing Guide)

Plugin Format: Windows VST3

Installer File Format: .exe

  1. Follow the Accessing Windows steps
  2. On your personal device, download the De-Feedback v1.1.4 or above Windows installer. It should be in a .exe file format.
  3. Copy this installer file to a USB stick.
  4. Plug it into any of the USB ports on the transform.engine.
  5. Locate your USB stick in the window and find your De-Feedback installer file.
  6. Run the Application.
  7. Follow the installer prompts to install De-Feedback.
  8. Exit the plugin host and rescan plugins.

Licensing​

  1. Plug a USB stick into the transform.engine, then open De-Feedback in Test Run mode:

    Library -> Add/Remove Plugins -> Select De-Feedback -> Test Run

  2. In the plugin, open the Licence Management screen:

    Show Menu -> Licence Management

  3. Enter your licence ID and password.

  4. Click the Activate button three times. A popup will ask you to save a request file. Save it to the USB stick, then eject the drive.

  5. On an internet-connected device, go to http://tinyurl.com/manage-offline and upload the request file from the USB stick.

  6. The website will provide a response file. Save it to the USB stick, then plug the USB stick back into the transform.engine.

  7. The plugin will show a popup asking for the response file. Select the response file from the USB stick. De-Feedback should now be fully licensed.

De-licensing​

danger

Before resetting the plugin host, you must remove the De-Feedback licence using the steps below. If you reset the plugin host without deactivating the licence first, you will lose that licence.

  1. Plug a USB stick into the transform.engine, then open De-Feedback in Test Run mode:

    Library -> Add/Remove Plugins -> Select De-Feedback -> Test Run

  2. In the plugin, open the Licence Management screen:

    Show Menu -> Licence Management

  3. Click Deactivate twice within one second and follow the prompts.

  4. Save the generated request file to the USB stick, then eject the drive.

  5. On an internet-connected device, go to http://tinyurl.com/manage-offline, upload the request file, and complete the deactivation process.